 |
 |
 |
 |
 |
ESD Rubber Mat
|
|
MS-021401
ESD Rubber Mat |
*ESD Rubber mat is mainly made of
anti-static or conductive material and dissipating static rubber.
*Surface is static dissipation layer of 0.5mm thick while bottom is
conductive layer of 1.5mm.
*The general thickness of mat is 2mm.
*Available color is green, pale, blue, black, yellow and so on.
*Surface resistance: 106-1011¸
*Bottom resistance£º103-105¸
*Abrasion rate£º< 0.02g/cm2
*Static dissipation time£º< 0.1S |
|
MS-021401
ESD Rubber Mat |
 |
| |
ESD rubber mat or
conductive ground mats should be laid out in the workshops and
advanced laboratories for microelectronic industries such as
electronic semi-conduct devices, electronic computers, electronic
communication equipment and integrated circuits etc. To eliminate
damages caused by static electricity. When ESD rubber mat (ground
mats) are laid out and grounded, the working surface will discharge
the static electricity of human bodies so that a near-equipotential
can be maintained for ESEDS tweezers, tools, utensils and
instruments, through which human bodies contact the working table
and static sensitive devices (SSD) are free from broadband
interference produced by static discharging such as
triboelectrification etc. In this way, electrostatic protection is
realized.
ESD rubber mat are mainly made of anti-static (conductive) and
static-dissipative materials, and synthetic rubber. The surface
layer is a 0.5mm thick static-dissipative layer. The bottom layer is
a 1.5mm conductive layer. Generally,2mm thick double-layer structure
is used. The available colors include green, gray, blue, black and
yellow etc.*Resistively of |
|
|
 |
 |
 |
 |
 |
 |
 |
|
