|
Y2000-16
Spec.
‧
Reduced programming
and verification time of various Flash Memory devices.
‧
Easy operation with
Windows based GUI.
‧
Provide memory IC
characteristic examination and fail analyzing function..
‧
Equipped with 64M
byte (512M bit) memory.
‧
Support various
packages including TSOP, CSP, and BGA.
◎
Product Features
 Y2000
reduces programming and verification time of various Flash Memory
corresponding to speedy device support using basic algorithm of Y1000.
Easy and
comfortable operation with touch panel!
Hardware consists of Celeron
700MHz, 128M Main Memory, 10GB
HDD, which permits an easy and comfortable operation by means of
Menu Selection on Screen using GUI, based on Windows. Incorporating
LAN interface and CD drive as
a standard configuration; Master Data Transfer can be easily executed with
high speed. In addition, the system can be customized to according to the
usage and historical management of each operation process can be executed.
Increase
productivity! Pack a punch in prototyping and R&D!
In combination with
Auto-Handler, productivity can be improved. Since Y2000 can be networked for
high-speed data transfer, it is also suitable for development field. Y2000
provides improvement of throughput widely from development to production
field.
Break
away from current limitation, Y2000 brings you
”Testing”!
According to purpose of measurement, simply measurement of
Access Time, Icc and Ipp measurement are possible so that quality of device
can be improved. Further, failure-analyzing function such as various margin
tests, analyzing function of fail bit is available.
Supports
various device packages
Not only
PLCC, TSOP, SOP but also a variety of packages such as FBGA, uBGA,
MCP, QFP are supported. Please refer to device support list and package
list.
◎Product
Specifications
|
Size |
650(W)
x 320(D) x 150(H) mm |
|
Weight |
12.0
Kg |
|
Power |
85~265V
50/60Hz 200VA |
|
Temperature |
10°~35°C |
|
Humidity |
20~80%
non-condensing |
|
Supported
Devices |
EPROM,
OTPROM, EEPROM, Flash Memory, and Micro controller. |
|
Programming |
Manufacturer
approved algorithm |
|
Hardware
Specification
(PC control through Parallel port Windows
95 or above) |
|
CPU |
SH7032 |
|
RAM |
64
MB (512 MB) |
|
RAM
max (option) |
128
MB (1 GB) |
|
PIN
Driver |
64-pin
per socket |
|
Address |
24-pins
(A0 to A23) |
|
Data |
8,
16, and 32 bit |
|
Vcc |
2.0~7.0V
(40mv step) |
|
Vpp |
2.0~16.0V
(80mv step) |
|
Control
pin |
7-pins
(max.) |
|
Pulse
width |
100ns
(min.) |
|
ID
check command or A9/VIH |
|
Control
Unit |
|
CPU |
Celeron
700 MHz |
|
RAM |
128
MB |
|
HDD |
10
GB |
|
FDD |
3.5"
(2 mode) |
|
OS |
Windows
98 |
|
Others |
3.5"
FDD/CD-ROM Drive,
and
LAN
I/F (10BASE-100) |
|
Display
terminal such as
CRT
or
TFT-LCD
monitor are option. |
E-Mail
Y501 > Y1000-8 >
Y2000-16 > PH-200
|
